Welded Pipes & Tubes

Specifications ASME / ASTM A249 / A 269 / A270 / A2554 / A312 / EN 10217-7, Equivalent to EN & DIN Standards
O.D 12.70 mm to 323.85 mm
N.B 3/8" - 12"
Thickness 0.9 mm to 9.53 mm Sh5 / Sh10 / Sh40
Length up to 11.6 meters
Process Features Solution Annealed - Pickied & Passlvated
Surface Finish Pickled / Polished (OD), finish 180w, 240w, 320w, 400w & 600#
Grade 201 / 304 / 304L / 316 / 316L / 321

Stainless Steel Butt Weld Fittings

Specifications ASTM A403, EN 10253-4 ,MSS SP43, DIN 2609,DIN 2605,DIN 2615,DIN 2616,DIN 2617
Type Seamless / Welded
Variants 304, 304L, 304H, 316, 316L, 316H
Range ½” NB to 12” NB in Sch 10s, 40s
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43

Stainless Steel End Caps

Stainless Steel 90° Elbows

Stainless Steel 45° Elbows

Stainless Steel Concentric Reducers

Stainless Steel Eccentric Reducers

Stainless Steel Equal Tees

Stainless Steel Reducing Tees

Stainless Steel Coils

Name HR No.1 Finish
Grade 304/304L
Width 1030,1250,1280,1530,1550
Thickness 2.5 to 5.0mm
Thickness Tolerance ± 3%
Width Tolerance ± 10mm
ID 610mm
5 feet 2.50 - 3.00 mm
Remarks Mill Edge Only, 1030 mm Width coils Subject to Mill Confirmation
Name CR 2B Finish
Grade 304/304L
Mill Edge 1030,1240,1280
Slit Edge 1000,1219,1250
ID 508/610mm
Unit Weight 4.0-5.0 MT/6.0-8.0 MT/9.0-12.0 MT/15.0-22.0 MT
Remarks Unit Weight less than 5.0 MT with USD 10/MT, 1030 mm Width coils Subject to Mill Confirmation

Bright Bars

Size Range 5mm to 100mm
Length 3 meter to 6.5 meter or as per customer requirement
Tolerance h9, h10, h11, k12, k13 or as per customer specification
Heat treatment Annealed, Solution annealed, Quenched and tempered, Hardened and tempered
Specification As per EN, DIN, JIS, ASTM, AFNOR, BS, ASME, NACE, AISI, QQS, MILS, ASM
Supply Conditions Cold drawn bars, Centreless ground bars, Peeled and polished bars, Rough peeled bars, Smooth turned bars. Grit polish as per customer request

Flat Bars

Width In MM Thickness In MM
40 4 to 20
45 4 to 20
50 4 to 20
60 5 to 20
65 5 to 20
70 5 to 20
75 5 to 20
80 5 to 20
85 6 to 20
90 6 to 20
100 10 to 25
120 10 to 25
125 10 to 25
150 10 to 25
Supply Conditions

Length up to 12 meters. Cut length available as per customer requirement

Both ends are color coded as per customer requirements

Round Cornered as well as Sharp Cut available as per customer requirement

100% material identity tested through handheld spectrometer to avoid mix-up

Hexagonal Bars

SUNRISE group also specializes in manufacturing of various grades and sizes of Hexagonal bars as well as Square Bars.

Size Range 18mm to 60mm
Supply Conditions

Hot Rolled (Black) Surface

100% Ultrasonically tested

Spot grinded or Fully grinded as per customer requirement

Free from surface defects and cracks

Length up to 12 meters. Cut length available as per customer requirement

100% material identity tested through handheld spectrometer to avoid mix-up

Square Bars

SUNRISE group also specializes in manufacturing of various grades and sizes of Hexagonal bars as well as Square Bars.

Size Range 18mm to 60mm
Supply Conditions

Hot Rolled (Black) Surface

100% Ultrasonically tested

Spot grinded or Fully grinded as per customer requirement

Free from surface defects and cracks

Length up to 12 meters. Cut length available as per customer requirement

100% material identity tested through handheld spectrometer to avoid mix-up

Angles

Angles and Channels are also a part of the extensive product range manufactured by SUNRISE Group. We are manufacturing angles and channels of various grades in following size range.

Size MM Thickness In MM
25 X 25 3 to 6
30 X 30 3 to 6
35 X 35 3 to 6
40 X 40 3 to 6
Supply Conditions

Length up to 12 meters. Cut length available as per customer requirement Ends colored as per customer specific requirements

Channels

Angles and Channels are also a part of the extensive product range manufactured by SUNRISE Group. We are manufacturing angles and channels of various grades in following size range.

Size MM Weight in Kgs / MTR
75 X 40 6.8
100 X 50 9.2
35 X 35 3 to 6
40 X 40 3 to 6
Supply Conditions

Length up to 12 meters. Cut length available as per customer requirement Ends colored as per customer specific requirements